Temperature Converter
Enter any field to convert all units instantly. Formula: °F = °C × 9/5 + 32; K = °C + 273.15
Common Temperature References
| Context | °C | °F | K |
|---|---|---|---|
| Boiling Point of Water | 100 | 212 | 373.15 |
| Melting Point of Water (Ice) | 0 | 32 | 273.15 |
| Human Body Temperature | 37 | 98.6 | 310.15 |
| Room Temperature (Standard) | 25 | 77 | 298.15 |
| Oven Medium Temp | 180 | 356 | 453.15 |
| Absolute Zero | -273.15 | -459.67 | 0 |
An equipment spec sheet lists a maximum operating temperature of 400°F, but the factory temperature controller is set in °C, so the operator must confirm the converted value immediately to avoid overheating damage. This tool converts between °C, °F, and K in real time and provides reference points for common engineering temperatures (solder melting points, material transition temperatures, etc.).
Converting 400°F: / To °C: (400 - 32) × 5/9 = 368 × 5/9 = 204.4°C / To K: 204.4 + 273.15 = 477.55 K / Confirm equipment max operating temperature: set the controller to 200°C (4.4°C safety margin) / Common references: Sn-Pb solder melts at 183°C (361°F); lead-free solder (SAC305) melts at 217°C (423°F)
FAQFAQ
Related Tools
Thermal Expansion Calculator
After confirming the operating temperature, calculate material thermal expansion over this temperature delta to keep part tolerances and fixture accuracy unaffected.
Open toolPressure Converter
Temperature and pressure are usually listed together in equipment specs; verify pressure units are consistent while converting temperatures.
Open toolLength Converter
Temperature affects material dimensions (thermal expansion); after confirming the temperature range, use length conversion to check drawing and CMM measurement unit consistency.
Open tool